DE EN FR ES JP

Big Ben & Sherlock's House - Assembling Instructions

Dear puzzle friend!

Here you will find assembling instructions for the Big Ben Nightlight and the Sherlock's House desk organizer. We thank you for bringing these two stretch goals to life via supporting our Kickstarter Campaign Cluebox PRO: Sherlock's Camera. Have fun assembling, using and displaying these two Kickstarter exclusives!

BIG BEN
SHERLOCK'S HOUSE

Step 1. Connect the three walls of the Big Ben as shown. NOTE: The front wall has different kinds of edges under the clock! See the difference highlighted with green arrows.

Step 2. Take the black paper "roof" and fold it. Pull the peaks of the roof through the slots of the small square as shown. Be patient to not ruin the paper while accomplishing this step.

Step 3. Fold the white paper "walls" and adjust them under the black paper "roof". Then fix the paper construction into the wooden walls construction from the previous step using the wooden element with bumps. Make sure the bumps get into the holes located in the white paper, black paper and on the wooden walls under the clocks.

Step 4. Put the construction onto the podium as shown

Step 5. Take the acrylic switch and insert it into the fourth "wall" of the big ben as shown. You will use this switch later on to turn the light on and off.

See the video to see how it goes.

Step 6. Adjust the wooden element with fork endings as shown.

Step 7. Now attach the battery so that the black on/off switch gets inside the small square hole of the acrylic element. Hold the battery tight in this position and tilt the wire onto the "forks".

If you did everything right, you will be able to turn the light on and off by moving the acrylic switch

Step 8. Adjust the wall with the battery to the previously assembled clock walls. Finally, put the three square elements on top of the tower to stabilize the construction. Enjoy!

Step 1. Connect the three elements as shown. Make sure to push the side elements down and to the inside.

Step 2. Adjust the back side of the house (the element with iDventure logo). Then adjust the small stair and the floor.

Step 3. Put the black paper parts of a corresponding shape onto the sides of the house. Then slide in the carved elements above the paper parts. Then build the entrance using the 221B-element and the railings. Put the black paper door element onto the front surface and then adjust the entrance onto it.

Step 4. Build the lanterns as shown and hang them at the entrance. Enjoy!